Cycle Hauler Motorcycle Trailers Gallery
Single Trailer Our motorcycle trailers all have a rear security gate/ramp with a built-in stabilizer. Combined with our wheeled front jack, these facilitate loading and unloading your bikes when the trailer is not connected to a vehicle. Drop the stabilizer from between the folded ramp and pin it in the down position. Crank the front wheel of the jack down until the rear stabilizer is firmly on the ground and you can now safely load or unload without being hooked to a tow vehicle.
	Double/triple The Cycle Hauler double/triple motorcycle trailer easily accommodates two full Dressers with room to spare... and it can still be pulled by a car! The two side wheel chocks can be adjusted forward 4 inches in the event that a bike has exhaust extensions.
Double/triple The Cycle Hauler motorcycle trailer double/triple model easily accommodates three bikes: two full-size cruisers as well as a  middleweight cruiser. The two side wheel chocks can be adjusted from side to side. When three bikes are to be trailered the side chocks should be positioned as far to the right and left as possible. The center chock is set ahead of the side chocks. When loading three bikes the center bike goes on first and is ahead of the bikes on the sides.
	4 Stewart Road,  Collingwood, Ontario,  Canada L9Y 4K1 Phone: 705-444-3107 Fax: 705-445-4273 Email: support@cyclehauler.com
Models and accessories may not be exactly as shown in photographs.

Motorcycle trailers from Cycle Hauler