NEW! EZ Sled Loader $439.00 (Cdn.) + shipping and appl. taxes
Effortlessly load and unload a snowmobile into the bed of a pickup truck Presenting Our New"ez-sledloader" Web Video... See For Yourself "ez-sledloader makes sled loading easy!"   Click Here To Watch Or Download The "ez-sledloader" Web Video. Download The Latest "Windows Media Player"
Our lightweight aluminum sled loader allows anyone to effortlessly load a snowmobile into a standard six foot bed pickup truck. You no longer need to find a suitable snow bank, or enlist the help of four friends to load or unload your sled.  Drive the skis up the side rails and the track climbs the ladder. Ski stops help you gauge how far to drive up the ladder to reach the balance point. Engage the parking brake and step down from the snowmobile. Lift the rear of the snowmobile until the rollers on the rack touch down on the truck bed. Now push forward and slide the loader and the snowmobile as far into the truck as possible.  Secure the snowmobile with appropriate tie-downs. To unload, release the tie-downs and roll the rack and snowmobile out of the truck, lowering the rear end to the ground. Release the parking brake on the snowmobile and it will simply slide down the loader to the ground. EZ Sled loader positioned against tail gate	Strap the sled securely into the truck box Adjustable rails Adjust from 32" to 48"
Skis on inside of rails Ski stops - skis straddling the rails	The side rails are fully adjustable in 1" increments for the narrowest to the widest skis. Skis can either straddle the rail where the ski is designed with dual carbides on each edge of the ski. Or where the carbides are mounted on the centre of the ski, adjust the rails to allow the carbides to run up the inside of the rail. In this configuration the outside half of the skis are supported by the rails. Optional ski glides can be added to the bottom of the rails to make positioning the skis even easier.   Optional ski guides
SPECIFICATIONS Lightweight aluminum construction (approx. 50 lbs) Stainless steel fasteners Two large 3" dia. x 12" rollers allow the load to be easily pushed into a standard 6' truck bed 9' 6" overall length when assembled Adjusts from 32" to 48" Shipped by courier knocked down in a carton 81"x 3 1/2" x 18".	FEATURES Easier than hooking up and loading a trailer The EZ Sled Loader is easily lifted in and out of the truck bed; no tools required! You do not bolt it into the bed of the truck. Our all-aluminum construction means no paint chipping or rusting The EZ Sled Loader can be disassembled to a convenient, compact size for storage Optional ski guides. Optional Ski Rail Extensions for higher bed trucks (ie. 4 x 4)
1. Position the EZ Sled Loader's stop against the tail gate of the truck. Drive the snowmobile up the EZ Sled Loader to the balance point and engage the parking brake.
2. Pick up the rear of the snowmobile.
3. Roll the loader forward into the truck.
Right click the image on the right  to download the EZ Sled Loader four-colour PDF brochure (474kb). Adobe Acrobat Reader is required to view this file. For a free reader and browser add-on, visit www.adobe.com
	4 Stewart Road,  Collingwood, Ontario,  Canada L9Y 4K1 Phone: 705-444-3107 Fax: 705-445-4273 support@cyclehauler.com

EZ Sled Loader from Cycle Hauler